- 4x4 mesh shuffle, every MPO port reaches all four fabrics
- Upstream legs color coded blue, orange, green and brown per fabric
- Patch cord format, no housing or cassette and no rack space consumed
- Two fewer mated MPO connections than a cassette-based shuffle
- Single-mode G.657.A1, MPO-8 APC (32 fiber) or MPO-16 APC (64 fiber)
- Factory terminated and 100% IL/RL tested
Engineered to Outperform
Delivered with Certainty
Procurement Made Simple
Rapid Deployment Ready
Ready To Scale
Compliance Assured
FlexSHUFFLE™ 4x4 MPO shuffle assemblies build a full fiber mesh between four MPO ports and four upstream switch fabrics in a single pre-terminated cable. Each leg distributes its duplex lanes across all four legs on the opposite side, so every port reaches every fabric without a shuffle cassette, fiber-level patching or re-mapping in the field. Two builds are available: 32 fiber on MPO-8 connectors, and 64 fiber on MPO-16 for 800G and 1.6T switch ports.
The upstream legs are color coded blue, orange, green and brown, following the TIA-598 order for positions 1 to 4. Each switch fabric is identified at a glance, which speeds up installation and removes guesswork during moves, adds and changes in dense leaf-spine and AI cluster fabrics.
FlexSHUFFLE™ is built in a patch cord format. There is no housing, cassette or panel to mount, and no rack space is consumed. The assembly routes through existing cable managers like any other patch cord, and removing the cassette also removes two mated MPO connections from every link, leaving more of the optical loss budget for the channel.
Assemblies use bend-insensitive single-mode G.657.A1 fiber with MPO-8 or MPO-16 APC connectors, and are factory terminated and 100% tested for insertion loss and return loss before shipment.
| General | |
| Configuration | 4x4 mesh shuffle (4 × MPO-8 to 4 × MPO-8, or 4 × MPO-16 to 4 × MPO-16) |
| Fiber Count | 32 fibers (8 per MPO-8 leg), or 64 fibers (16 per MPO-16 leg) |
| Lane Mapping | Mesh, duplex: each leg distributes its duplex lanes across all four legs on the opposite side |
| Leg Identification | Upstream legs color coded blue, orange, green and brown (TIA-598 positions 1 to 4) |
| Format | Patch cord assembly, no housing, cassette or rack space required |
| Technical Specs | |
| Fiber Type | Single-mode G.657.A1 |
| Connectors | MPO-8 or MPO-16, Male and Female, APC polish |
| Connector Polish Angle | 8° APC (Angled Physical Contact) |
| Insertion Loss | ≤0.35 dB per MPO connector |
| Return Loss | ≥60 dB |
| Operating Temperature | -20°C to +70°C |
| Compliance | TIA/EIA-568, RoHS, REACH |
| Single-mode (G.657.A1), MPO-8 APC, 4x4 Mesh Duplex | |
| FSA-S7-32-4MP8F-4MP8M-MD | FlexSHUFFLE™ Assembly, Single Mode (G.657.A1), 32 fiber, 4x4 MPO-8(Female) / MPO-8(Male), mesh, duplex |
| Single-mode (G.657.A1), MPO-16 APC, 4x4 Mesh Duplex | |
| FSA-S7-64-4MP16F-4MP16M-MD | FlexSHUFFLE™ Assembly, Single Mode (G.657.A1), 64 fiber, 4x4 MPO-16(Female) / MPO-16(Male), mesh, duplex |










