- 4x4 or 8x8 mesh shuffle, every MPO port reaches every fabric
- Fibers bonded to a thin, flexible substrate under conformal coating
- Machine-placed routing for a repeatable lane map and controlled bend radius
- Fits cassettes, chassis, sleds and backplanes where a shuffle box will not
- Upstream legs color coded per fabric in TIA-598 order
- Factory terminated and 100% IL/RL tested
Engineered to Outperform
Delivered with Certainty
Procurement Made Simple
Rapid Deployment Ready
Ready To Scale
Compliance Assured
ThinSHUFFLE™ flex circuit MPO shuffle assemblies route every fiber of a mesh shuffle on a thin, flexible substrate. Individual fibers are laid down and bonded to the film by machine, then sealed under a conformal coating, so the full cross-connect between input and output MPO legs is fixed in a single flat circuit rather than in a moulded box or a bundle of loose fibers.
Because the routing is placed by machine, every assembly carries the same lane map with no hand-routing errors, and the fibers hold their position and bend radius in service. The substrate is only a few hundred microns thick and can be flexed, folded or mounted through its corner holes, so it fits inside cassettes, switch chassis, sleds and backplanes where a conventional shuffle box will not.
Standard configurations include 4x4 on MPO-8 (32 fiber) and 8x8 on MPO-16 (128 fiber), for 400G, 800G and 1.6T leaf-spine and AI cluster fabrics.
Assemblies use bend-insensitive single-mode G.657.A1 fiber with ScaleFibre Low Loss MPO connectors, and are factory terminated and 100% tested for insertion loss and return loss before shipment. Custom lane maps, port counts and substrate outlines are available on request.
| General | |
| Configuration | 4x4 mesh shuffle (4 × MPO-8 each side), 8x8 mesh shuffle (8 × MPO-16 each side), or Base-8 to Base-12 conversion (3 × MPO-8 to 2 × MPO-12). Other port counts custom-routed on request |
| Fiber Count | 32 fibers (4x4, MPO-8), 128 fibers (8x8, MPO-16) or 24 fibers (3 × MPO-8 to 2 × MPO-12) |
| Lane Mapping | Mesh, duplex: each leg distributes its duplex lanes across all legs on the opposite side. Custom lane maps available on request |
| Leg Identification | Upstream legs color coded in TIA-598 order: blue, orange, green and brown (4x4); blue, orange, green, brown, slate, white, red and black (8x8) |
| Format | Flexible optical circuit with corner mounting holes, for mounting in cassettes, chassis, sleds or backplanes |
| Technical Specs | |
| Substrate | Flexible film, fibers sealed under conformal coating |
| Fiber Routing | Machine-placed, single layer, controlled minimum bend radius |
| Fiber Type | Single-mode G.657.A1 |
| Connectors | MPO-8, MPO-12 or MPO-16, Female or Male, APC polish |
| Connector Polish Angle | 8° APC (Angled Physical Contact) |
| Insertion Loss | ≤0.35 dB per MPO connector |
| Return Loss | ≥60 dB |
| Operating Temperature | -20°C to +70°C |
| Compliance | RoHS, REACH |
| Single-mode (G.657.A1), 4x4 Mesh Duplex | |
| FC-S7-32-4MP8F-MD | Flexible optic circuit, Single Mode (G.657.A1), 32 fiber, 4 x MPO-8 female each end, mesh (any-to-any), duplex |
| Single-mode (G.657.A1), 8x8 Mesh Duplex | |
| FC-S7-128-8MP16F-MD | Flexible optic circuit, Single Mode (G.657.A1), 128 fiber, 8 x MPO-16 female each end, mesh (any-to-any), duplex |
| Single-mode (G.657.A1), Base-8 to Base-12 Conversion | |
| FC-S7-24-3MP8F-2MPOF-B | Flexible optic circuit, Single Mode (G.657.A1), 24 fiber, 3 x MPO-8 female to 2 x MPO-12 female, Base-8 to Base-12 conversion |



















